Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

Modelling of Ejecta as a Space Debris Source

When a micro-debris or a micrometeoroid impacts a spacecraft surface, a large number of secondary particles, called ejecta, are produced. These particles can contribute to a modification of the debris environment: either locally by the occurrence of secondary impacts on the components of complex and large space structures, or at great distance by the formation of a population of small orbital debris. This paper describes firstly, the ejecta overall production, and secondly, the lifetime and the orbital evolution of the particles. Finally the repartition of ejecta in LEO is computed. Some results describing the population as a function of size and altitude are presented.     

Modelling of Spall in an Anisotropic Aluminium Alloy

Spall caused by hypervelocity impacts at the lower range of velocities could result in significant damage to spacecraft. A number of polycrystalline alloys, used in spacecraft manufacturing, exhibit a pronounced anisotropy in their mechanical properties. The aluminium alloy AA 7010, whose orthotropy is a consequence of the meso-scale phase distribution or grain morphology, has been chosen for this investigation. The material failure observed in plate impact was simulated using a number of spall models. The Hugoniot elastic limit and spall strength have been studied as a function of orientation, and compared to experimental results.     

电涡流传感器在偏心检测中的应用

本文讨论了电涡流传感器基本原理,提出了半边谐振曲线测量、传感器极值参数选择、传感器线圈交叉绕制等新方法,解决了小直径弱涡流效应偏心检测的难题。在WPX-01型偏心测量仪设计中,获得了满意的效果。     

奇异摄动法解最优拦截问题

本文应用奇异摄动法探讨水平面内飞机的中远程拦截问题。在介绍航迹优化的一般方法之后,通过采用三重时间尺度分离法建立奇异摄动的数学模型,求出了外层解、边界层解和一致有效的组合解,导出了以推力参数和滚转角为控制变量的最短时间拦截的最优控制律。并以F-4飞机为例,计算了拦截成功的最短时间和最优航迹。其结果可作为空中拦截实时在线优化的参考。     

Collision Risk Mitigation in Geostationary Orbit

The short- and long-term effects of spacecraft explosions, as a function of the end-of-life re-orbit altitude above the geostationary orbit (GEO), were analyzed in terms of their additional contribution to the debris flux in the GEO ring. The simulated debris clouds were propagated for 72yrs, taking into account all the relevant orbital perturbations.The results obtained show that 6–7 additional explosions in GEO would be sufficient, in the long term, to double the current collision risk with sizable objects in GEO. Unfortunately, even if spacecraft were to re-orbit between 300 and 500km above GEO, this would not significantly improve the situation. In fact, an altitude increase of at least 2000km would have to be adopted to reduce by one order of magnitude the long-term risk of collision among geostationary satellites and explosion fragments. The optimal debris mitigation strategy should be a compromise between the reliability and effectiveness of spacecraft end-of-life passivation, the re-orbit altitude and the acceptable debris background in the GEO ring. However, for as long as the re-orbit altitudes currently used are less than 500km above GEO, new spacecraft explosions must be avoided in order to preserve the geostationary environment over the long term.     

基于预测零控脱靶量的拦截器中制导段导引

针对三维空间内的高速飞行目标,提出了一种基于预测零控脱靶量的中制导段导引方法。建立了拦截器与目标的相对运动关系模型,分析了确定修正轨道的约束条件,并在此基础上推导出修正轨道根数的计算方法。同时根据待增速度给出了推力定向和推力发动机工作时长的确定方法。仿真结果表明,该方法能有效实现拦截器中制导段的制导控制。     

有限推力下时间最优轨道转移

研究了一种有限推力作用下的时间最优轨道转移计算方法。以非奇异根素形式的高斯行星摄动方程为基础,由庞德里亚金极小值原理导出正则方程组,通过将最优控制问题转化为协状态初值为待优化参数的参数优化问题,并通过非线性规划求解得到的参数优化问题,从而避开求解两点边值问题的困难。文章最后给出2个算例,分别计算了零倾角零偏心率最优轨道转移和大倾角改变最优轨道转移。计算过程及结果表明本文所用方法对协状态初值猜测敏感性小,收敛迅速;零倾角零偏心率情况下无奇异;所得控制轨线光滑。     

实现快速轨道大机动的混合制导策略研究

主要研究了在有限推力情况下远程快速轨道交会的制导控制问题,提出了采用速度增益制导结合E制导的混合轨控方案实现两冲量轨道精确交会。通过仿真验证,各方向制导位置控制精度在100 m量级,各方向速度控制精度在m/s量级,2种制导方法能很好地实现交班转换。该方法工程可实现性好,可满足远程快速轨道交会制导要求。     

金属膜片贮箱膜片变形的数值模拟与失效分析

根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。在一定条件下，模拟了贮箱金属膜片的变形翻转过程，分析其翻转的特点，以及变形过程中表面压力、顶点径向位移和卷边处应力的变化，并给出了膜片失效原因。研究表明，数值模拟与试验结果较为吻合，所建分析模型合理。